Circutor DHB-302, Instruction Manual

Page: 26 / 70

4�6�2�4� UppeR COLOUR
This screen is used to configure the upper colour of the display. In other words, this is the dis-
play colour when the measured value is above the upper colour limit (see section “
4.6.2.6.
UPPER COLOUR LIMIT”
).
The screen flashes between the symbol and the configured value (
figure 25
)
figure 25: Upper colour configuration screens.
To modify the options, press the button.
The colour options are:
Red. Green.
Orange.
To move from one option to another, press the button repeatedly.
When you see the option you want, validate by pressing the button.
The unit goes back to the screen shown in
figure 19
.
To move to the next parameter on the menu, press the button.
Default value: red .
4�6�2�5� LOWeR COLOUR LIMIT�
This screen is used to configure the value of the lower colour limit.
The screen flashes between the symbol and the configured value (
figure 26
).
figure 26:Lower colour limit screens�
To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button.
Once at the desired value, validate by pressing the button.
26
DHB-302 DHB-324
Instruction Manual