Circutor DHB-302, Instruction Manual

Page: 20 / 70

The unit goes back to the screen shown in
figure 14
.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the parameters menu
(
figure 12
).
Default value: Synchronisation with the voltage (V).
4�6�1�3� VOLTAge RANge
This screen is used to configure the voltage range
�
The screen flashes between the symbol and the configured value. (
figure 15
).
figure 15: Voltage range screen�
To edit the parameter, press the button.
The options are:
100 V. 400 V
To move from one option to another, press the button repeatedly.
When you see the option you want, validate by pressing the button.
The unit goes back to the screen shown in
figure 15
.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the parameters menu
(
figure 12
).
Default value: 400 V.
20
DHB-302 DHB-324
Instruction Manual