38
CVM-D41 DC
Instruction Manual
When the desired value is shown on the screen, press the
key to skip the digit.
Configuration values
Table 31:Configuration values: Login Password�
Login password
Minimum value
0
Maximum value
9999
To validate the data, press the
key.
Use the
and
keys to browse the configuration screens of the menu.
5�6�2�- CYCLIC DISPLAY
The display screens can change automatically depending on the time programmed in this section.
S
CyC
0000
Use the
, key to modify the value of the flashing digit
When the desired value is shown on the screen, press the
key to skip the digit.
Configuration values
Table 32: Configuration values: Cyclic display�
Cyclic display
Minimum value
0 s.
Maximum value
60 s.
Note:
If set to
0
, the display screens do not cycle automatically.
To validate the data, press the
key.
Use the
and
keys to browse the configuration screens of the menu.
5�6�3�- BACKLIGHT OF THE DISPLAY
The time that the display backlight will stay lit in seconds if no key is pressed is programmed on this
screen.
S
LiGH
0100
Use the
, key to modify the value of the flashing digit
When the desired value is shown on the screen, press the
key to skip the digit.
Summary of Contents for CVM-D41 DC
Page 1: ...INSTRUCTION MANUAL Power analyzer CVM D41 DC M337B01 03 22A ...
Page 2: ...2 CVM D41 DC Instruction Manual ...
Page 55: ...55 Instruction Manual CVM D41 DC 10 EU DECLARATION OF CONFORMITY ...
Page 56: ...56 CVM D41 DC Instruction Manual ...
