Circutor CVM-D41 DC, Instruction Manual

Page: 19 / 60

19
Instruction Manual
CVM-D41 DC
4�7�2�- TOTALISERS
For the
Positive Energy
,
Negative Energy, Positive Electric Charge
and
Negative Electric Charge
pa-
rameters, the value of Energy or Electric Charge since the device was started can be viewed by pressing
the key
while the corresponding parameter is being displayed.
The total value is displayed in 3 totalisers, A , B and C . When the key is first pressed, totaliser A
is displayed and the letter A is shown at the top left of the display.
Press key to view the different totalisers.
Table 9: Display range of the Totalisers�
Totaliser Display range
C 0... 9.999 k W/Ah
B
10 k W/Ah ... 99.99 M W/Ah
A
100 M W/Ah ... 999.9 G W/Ah
The totalisers can be cleared in the settings menu ("
5.6.8.- DELETING THE ELECTRIC CHARGE TOTALISERS
"
and
"
5.6.9.- DELETING THE ENERGY TOTALISERS"
) or through the communications options (
"6.3.5.- DE-
LETING VALUES"
).