----- Supply network analyzer CVM 96 Ethernet -------- ----- Page No. 27
b.2.- Programming the minimum value to be controlled:
OUT 1
RELAY 1
AL LO
0.000
(
Minimum value
b.3.- Programming the delay:
OUT 1
RELAY 1
SEC
Delay in seconds
0.000
(
maximum 9999 s
THD parameters can also be selected as alarm conditions.
- Press "
" to pass to the next option: the SETUP for the second relay is then
shown:
OUT 2
RELAY 2
CODE
00
(
Parameter No. (1)
Proceed as before. Pressing again "
" the SETUP option exited.
---------------------------------------------------------------------------
