5�19�- CPC-NET COMMUNICATIONS
In this point the CPC-NET communication parameters can be configured.
Press the
key to enter editing mode. It is identified by the
symbol and the blinking of the
digits to be modified.
The parameters to be configured are:
The
transmission speed
, BaudRate: 9600, 19200 or 38400.
The
parity
:
none
: no parity.
Even
: even parity.
Odd
: odd parity
The
number of stop bits
: 1 or 2
The
key increases the digit value or shows the next option.
The
key decreases the digit value or shows the next option.
The
key skips to the previous digit or the previous parameter.
The
key skips to the next digit or the next parameter.
Press
to validate the data; the
symbol disappears from the display.
If the value entered is lower than the minimum value or higher than the maximum value, the backlight
of the display flashes and the value entered is replaced with the minimum or maximum value, or with
the last value validated.
Press the
key to access the next programming step.
If no keys are pressed for 5 minutes, the unit switches to the simulation screen,
.
91
Instruction Manual
Computer SMART III FAST
Summary of Contents for Computer SMART III FAST 12
