5�16�- FAN
In this point the activation of the relay output associated with the fan can be configured.
It is possible to configure whether it is enabled
ON
or not
OFF
, as well as the temperature above
which it is to be activated or deactivated.
The unit has a hysteresis value of 5ºC when disconnecting the fan, in order to avoid continuous
connections and disconnections.
Press the
key to enter editing mode. It is identified by the
symbol and the blinking of the
digits to be modified.
The
key increases the digit value or shows the next option.
The
key decreases the digit value or shows the next option.
The
key skips to the previous parameter and the
key skips to the next parameter.
Press
to validate the data; the
symbol disappears from the display.
Maximum value:
80ºC.
Minimum value:
0ºC.
If the value entered is lower than the minimum value or higher than the maximum value, the backlight
of the display flashes and the value entered is replaced with the minimum or maximum value, or with
the last value validated.
Press the
key to access the next programming step.
If no keys are pressed for 5 minutes, the unit switches to the simulation screen,
.
88
Computer SMART III FAST
Instruction Manual
Summary of Contents for Computer SMART III FAST 12
