3.5.- CONNECTIONS
The
CEM-C20
has terminal covers to cover the top of the terminal box and the fixing screws
).
Figure 3: Terminal covers of the CEM-C20�
The fixing screws are of the mixed type, allowing the use of PZ2 and flat head screwdrivers.
Table 3:CEM-C20 connections�
Connections
Measurement terminals ( 1, 3, 4, 6, 7, 9, 10, 12)
Maximum cable cross-section
25 mm
2
( 16 mm
2
with end sleeve )
≤
1.2 Nm
Screwdrivers head
PZ2
Impulse output terminals ( 21, 22 ) and Power supply ( 13, 14)
Maximum cable cross-section
1.5 mm
2
( 1.5 mm
2
with end sleeve )
≤
0.6 Nm
Screwdrivers head
flat head ( 3 x 0.5 mm)
Once connected, the unit can be protected with two connection seals (
Figure 4: Seal of the CEM-C20�
10
CEM-C20
Instruction Manual
