Circutor CEM-C12c, Instruction Manual

Page: 8 / 28

3�2�- INSTALLATION
Terminals, opening covers or removing elements can expose parts that are hazardous
to the touch while the device is powered. Do not use the device until it is fully installed.
Installation instruction:
1�-
Choose 35mm standard DIN rail (the length is confirmed by yourself), fixed them in the location
which are waiting for installation.
2�-
Push down the clip under the bottom of the meter for a gear, see
Figure 1�
After push down
the clip
Después de
empujar hacia
abajo el clip
Figure 1:Push down the clip�
3�- Put the meter into the DIN rail as per
Figure 2
, then push up the clip for a gear, install meter to
the DIN rail, see
Figure 3
.
Figure 2:Put the meter into the DIN rail� Figure 3: Install meter to the DIN rail�
4�-
Making the connection according to the wiring diagram.
5�-
After connection, use lead sealing to seal terminal cover.
8
CEM-C12c
Instruction Manual