Circutor CEM-C12c, Instruction Manual

Page: 6 / 28

1.- VERIFICATION UPON RECEPTION
Check the following points upon receiving the device:
a) The device meets the specifications described in your order.
b) The device has not suffered any damage during transport.
c) Perform an external visual inspection of the device prior to switching it on.
d) Check that it has been delivered with the following:
- An installation guide,
If any problem is noticed upon reception, immediately contact the transport com-
pany and/or CIRCUTOR's after-sales service.
2.- PRODUCT DESCRIPTION
The CEM-C12c static single-phase energy meter measures class 1 (IEC 62053-21) / class B (EN50470),
with multifunction, RS-485 communications and DIN rail standard installations. It is the ideal solution
for residential and commercial installations.
The device features:
- Only 18 mm wide, can up to 100A.
- RS-485 communication , protocol Modbus-RTU.
- Device has 3.6V Lithium battery. The precision of RTC is better that 0.5s/day.
- Blue LCD backlight allows the device to be read in low light conditions.
-
1 key, to move between the different display screens and be able to configure the communi-
cations.
6
CEM-C12c
Instruction Manual