Circutor CEM-C12c, Instruction Manual

Page: 15 / 28

6�1�- PERIPHERAL NUMBER
This screen enables peripheral number configuration. To go into the configuration screen, press >
3 seconds.
> 3s
Press to change the digit value.
Press > 3 seconds to change digits.
If the last digit is pressed for > 3 seconds, the change is saved. The screen shown in
Figure 11
indicates that the changes have been saved correctly.
Figure 11:Done screen�

Configuration values
Table 5: Configuration values: Peripheral nº�
Peripheral Nº
Minimum value 1
Maximum value 247
Press to skip to the next programming step.
6�2�- MODBUS BAUD RATE
This screen is used to configure the Baud Rate. Press > 3 seconds to open the configuration screen .
> 3s
Press to change options.
Press > 3 seconds to save the change. The screen shown in
Figure 11
indicates that the changes
have been saved correctly.

Configuration values
Table 6:Configuration values: Baud rate�
Baud Rate
Possible values
9600
9600 bps
19200
19200 bps
38400
38400 bps
115200
115200 bps
15
Instruction Manual
CEM-C12c