Circutor CEM-C10, Instruction Manual

Page: 16 / 36

Table 6 (Continuation): Instantaneous value screens
Screen Parameters
Hours of operation from manufacture
4�6�- PARTIAL ENERGY DISPLAY
Note: The partial energy display menu is only displayed if the partial energy display option has been
selected in the setup menu (see
“ 4.7.6. Display” ).
Long press the key in the standby mode screen to open these display screens. Short press the key
to display the partial energy main screen,
Figure 9
:
Figure 9: Partial energy main screen�
Long press the key to open the different screens.
Short press the key to browse the different screens (see
Table 7
).
The PAR icon on the screen indicates that you are viewing the partial energies.
The standby mode is activated again when no key is pressed for 60 seconds.
Table 7:Partial energy screens�
Screen Parameters
Partial imported active energy.
Partial exported active energy.
Only displayed in the 4-quadrant version.
Partial reactive energy, quadrant 1 (L+). (2)
16
CEM-C10
Instruction Manual