Circutor CBS-400B Instruction Manual Download Page 22 | Manualshive

Page: 22 / 58

Circutor CBS-400B Instruction Manual Download Page 22

22

CBS-400B

Instruction Manual

Press key

to increase the day value, and key

to reduce it.

Press key

to confirm the value and skip to the hour configuration screen,

Figure 20: Clock setup: Time�

Press key

to increase the hour value, and key

to reduce it. Press key

to confirm the

value and configure the minutes, pressing the keys

and

.

Press key

to end the configuration; the screen in

is displayed for 3 seconds.

Figure 21: Clock setup: Setup completed�

5�2�- PROBLEMS OR CHANGES IN THE INSTALLATION

If the device detects a problem in the installation when the clock has been set up, the screens will be

lit in yellow and one of the following screens will be displayed:

The installation has changed, the new installation has to be saved by
accessing the setup menu, see

6.6.1.- SAVE INSTALLATION".

The installation has changed and the device does not find the

WGB

in

the channel being displayed.

If the

WGB

has been removed from the installation, access the setup

menu and save the installation, see

“6.6.1.- SAVE INSTALLATION”

The device has detected more

WGB

transformers than the installation

can accept.

«
...
20
21
22
23
24
...
»

Summary of Contents for CBS-400B



























































Reviews:

No comments