Circutor AFQm-3WF-030M-480, Instruction Manual

Page: 67 / 116

67
Instruction Manual
AFQm
● Type,
device range:

30A
: 30 A model.

60A : 30 A model.

70A : 70 A model.

100A
: 100 A model.
Press the key to access the next configuration step
Press the key to access the main screen of the device without saving the configuration values.
7�3�- INSTALLED DEVICES
The type of device are configured in this screen,
Figure 72
.
Figure 72: Configuration screen: Installed units
● Type of device: Master / Single / Slave
In this screen the type of device is selected, the possible options are:

Single: select this option if the AFQm does not have filters connected in parallel.

Master: select this option if the filter is going to be used as the “ master ” of a group of devices
in parallel.

Slave: select this option if the device is going to be used as the “ slave ” of a group of devices
in parallel.
Once the device has been configured as the “ slave ”, the next configuration step is shown in
section “
6.19.- ETHERNET COMMUNICATIONS
”.
Note: The and / keys are disabled in the slave devices .
Press the key to access the next configuration step
Press the key to access the main screen of the device without saving the configuration values.