04
CLEANING
For 135
–
180 Sq. Ft Models:
Remove the cartridge element from the filter tank.
1.
Using a garden type hose, clean the surface of the pleated
elements. Make sure to clean well between the pleats.
2.
Place the cartridge back into the filter tank ensuring that it
is seated correctly.
3.
Ensure lid “O”
-ring is correctly re-installed.
4.
Place the lid onto the tank and screw the lock ring down.
5.
Ensure you
’
ve placed
the lid “O”
-ring on the lid before you
start up the filter.
6.
Refer to the start up procedure to re-commence operation.
Do not over tighten the lid lock ring.
For 225
–
270 Sq. Ft. Models:
1.
First, use the air bleed screw located on top of the domed
lid to release any built-up pressure within the tank.
Unscrew the domed filter lid from the filter tank using the
two convenient molded handles.
2.
Remove the cartridge element(s) from the filter tank.
3.
Using a garden type hose clean the surface of the pleated
elements, making sure to clean well between the pleats.
4.
Place the cartridge(s) back into the filter tank ensuring that
it is seated properly.
5.
Ensure lid “O”
-ring is correctly re-installed.
6.
Place domed lid onto tank and screw tight using the two
molded handles.
7.
Refer to the start up procedure to re-commence operation.
It is suggested that you should periodically remove the cartridge filter element and soak it
overnight in a suitable cartridge cleaning solution product. This will remove any debris not removed
by hosing down the element. Follow directions for use on the cleaning solution product. The
cleaning time depends upon the swimming pool condition and use. Intervals between cleaning the
element should not exceed a period of 12 months.
CAUTION
FLOW DIAGRAM
FLOW DIAGRAM
