Circuit Slices, LLC
Sample & Noise User Manual
CS019
CS019-UM v2.0| www.circuitslices.com
4
This DIY option was not included as most patches will use a master or MIDI clock, to keep everything
synchronized.
If
not
using this internal clock option a shorting jumper must be placed between the center and lower
pins of J8. The module comes from the factory with this jumper installed. See below.
For easier RATE adjustments, you can use a ‘Log’ taper pot. The switch and potentiometer could be
mounted on a narrow blank panel positioned next to your Noise module.
If you use ‘0.1’ headers to connect to J8 and J9, and wire as shown, you will not void the module’s
warranty.
This little and very affordable module will greatly expand the capabilities of any modular synthesizer
rack. We know you will enjoy experimenting with noise, sampling patches, and random control signals
for hours on end, but don’t forget to make music!
This module is limited-warranted for one year with parts, under normal use – not including the
application of reverse or over-voltage power by customer. Return shipping to Circuit Slices from
customer not included. Return to Circuit Slices, LLC for repairs. Circuit Slices, LLC reserves the right to
replace the module if necessary. Please keep your receipt / packing slip for warranty information.
Circuit Slices, LLC
10028 Windjammer Trail
Aurora, OH 44202
