6
© IMPEX INC.
35
65
4
58
65
27
58
3
50
# 27 Limit pad 1pc
# 50 M6*⅜ 2pcs
# 58 M8*⅝ 4pcs
#65 OD20*ID8.5*1.5 4pcs
# 76 S13-17
ASSEMBLY INSTRUCTION
.
Tools Required for Assembling the Machine: One Crossing Wrench and Allen Wrench,
provided by manufacturer.
.
NOTE: It is strongly recommended that two or more people assemble this machine to
avoid possible injury.
STEP-1
1. Turn over the Slide Rail (#4), the Rear Stabilizer (#3) and the seat (#35) as below picture.
2. Slide the seat (#35) onto the rail (4). Attach Limit Pad (#27) to the Slide Rail (#4) and secure with
two screws (#50).
3. Attach the Rear Stabilizer (#3) to the Slide Rail (#4), tighten with 4 Washers (#65) and 4 Outer
hex Bolt (#58).
