Document: Service Manual
Description: Treadmill
Model: M7 LED
Page: 60 of 60
60
6.6 Troubleshooting the Treadmill
SYMPTOM
CAUSE
SOLUTION
Console display
does not illuminate.
A).No power to treadmill.
B).Console wire is not connected
or incompletely.
C).Overload, protecting is
started.
D).Console power source
damaged.
A).Check the on-off switch is on, switch
indicator shall be light. If not light,
check AC power source.
B).Check console wire every connector
points connect correctly, including
outward and connector point insert
PINs.
C).Check fuse(near on-off switch) is
worked or not, if worked, push it back,
and restart again, if work please
maintenance the running belt and
deck.
D).Turn off power then open the motor
cover, turn on the power and check
the console power pilot lamp(LED2)
where on the interface PCB, it shall be
light completely, if not, replace it.
(Refer to Chapter 5.3.1 on next page.)
Display not
completely.
A).Console is damaged.
B).Console source power is
unstable.
A).Replace the console PCB.
B).Check the power source, turn off
power then open the motor cover.
Turn on the power and check the
console power pilot lamp (LED1)
where on the interface PCB, it shall be
light completely, if not, replacing it.
Summary of Contents for M7
Page 1: ......
