10
Bluetooth Wireless Hands Free Car Kit User’s Guide
device for specific pairing instructions.
To complete the pairing process you will need to enter the correct CIRCLE Car Kit Passkey
when required by the other device.
The CIRCLE Car Kit shall remember the most recent paired device only.
Pairing your CIRCLE Car Kit with the Phone
1. Activate the Bluetooth function in the phone. If necessary, please refer to the user manual
of the phone for specific pairing instructions.
2. Plug your CIRCLE Car Kit into the cigarette lighter socket in the vehicle. The Green
indicator lamp should be on.
3. Press and hold the PAIR button on your CIRCLE Car Kit for six seconds until the Blue
indicator lamp flashes. Your CIRCLE Car Kit is now ready for pairing. Make sure your
CIRCLE Car Kit and the phone are not too far apart, (i.e. within 30 feet or 10 meters of each
other).
4. Initiate Bluetooth pairing in the phone to pair it with your CIRCLE Car Kit. Please refer to
the user manual of the phone for specific pairing instructions.
5. When asked by the phone, enter your CIRCLE Car Kit Passkey and then confirm, if
necessary. If pairing is successful, your CIRCLE Car Kit will now be ready to use.
6. If, pairing is unsuccessful, after approximately two minutes the blue indicator of Car Kit will
be off. Previous pairing (if any) will be erased. You may need to repeat steps 2 to 4 until
pairing is successful. (Note: Before pairing with a Bluetooth mobile phone, it is
recommended to first reset the phone by turning it off then on again).
Adjusting the Speaker Volume
To adjust your CIRCLE Car Kit listening volume during a call use the VOLUME control knob.
Placing and Receiving Calls
All of the instructions below pertaining to use of the CIRCLE Car Kit with a mobile phone
apply only to Bluetooth enabled mobile phones which have already been paired with your
