Cirago CDD3000, User Manual

Page: 4 / 19

CLONE:
Please note the below conditions before clone:
- Slot ‘A’ = SOURCE HDD
-
Slot ‘B’ = TARGET HDD
- TARGET HDD’s capacity MUST be larger than SOURCE
HDD, otherwise the CLONE cannot be completed. (Same
capacity is also not acceptable)
- Before CLONE function starts, make sure you back up any
important data in TARGET HDD; once CLONE started, all
data from
TARGET HDD will gone.
- Once the docking station is connected to the PC via USB,
One Touch Cloning will not be active. See Cloning with
USB section for details.
1)
One Touch Cloning
a)
Insert source HDD to Slot ‘A’; target HDD to Slot ‘B’, and
then turn on the power