34
8000 GPRS Cradle
Reference Manual
4.2.6 AT+APN
Read Command
Response
AT+APN?<CR> <CR><LF>[AP_Name]<CR><LF>
Example
AT+APN?
internet
GPRS Access Point “internet” is in use.
Write Command
Response
AT+APN=[AP_Name]<CR>
<CR><LF>OK<CR><LF>
Example
AT+APN=emome
OK
Change to Access Point “emome”.
Remarks
The Read command is to get the Access Point Name (APN) currently in use.
The Write command is to set the Access Point Name (APN) you want to connect to.
[AP_Name] is a string for the name of a GPRS access point, maximum 128 characters.
See Also
ATDT, AT+CHAP, AT+DHCP, AT+DLMT (GPRS)
Back to the Supported AT Commands.
