CipherLab 2564MR, User Manual

Page: 117 / 283

2564MR Barcode Scanner User Guide
Note: When using BT HID, some device driver may not support pre-defined PIN code for
authentication. In this case, make sure you have the scanner set to “No PIN or use
random PIN” before pairing. While pairing, the host PIN code will be displayed on the
computer screen. Have the scanner read the setup barcode “Enter PIN Code in
Decimal” or “Enter PIN Code in Hexadecimal” to input the matching PIN code. Refer
to Disable Authentication or Use Random PIN .
Secure Simple Pairing (SSP)
Secure Simple Pairing (SSP), introduced in Bluetooth
®
Core Specification 2.1 + EDR, is a new feature
designed to ease the pairing process while keeping up the communication security level. This function
is disabled by default.
*Disable
Enable
3.2.3 CONNECT TO DONGLE
Use random PIN
No PIN required
106
Enter Setup