13
Installation preparation
An inlet pipe should penetrate approx. 200 mm inside the tank.
Rubber sealing for Ø 110 mm pipe can be ordered
with CPX Part No.
67502
Series connection of tanks
The size of the pipe between the tanks is recommended
to be
Ø 110 mm and is intended to be
connected at the
flat surfaces. The pipe can be connected to the
short side or long side of the tank that has connection
planes at equal heights.
The distance between the tanks when buried should be
at least 500 mm.
Mounting the extension neck
All extension necks are attached to the tank in the same way.
1.
Clean the contact surface of the
extension neck, carefully position it
in the center and set it down on
the tank. Avoid moving the
extension neck sideways once it is
standing on the tank!
Clean and place a single string
of the sealant/adhesive provided
around the neck of the tank in the
middle of the area.
Summary of Contents for CPX Series
Page 16: ...16...
