MC55i Terminal Hardware Interface Description
6.5 Compliance with FCC Rules and Regulations
46
MC55i_Terminal_HD_v01.201a
Page 46 of 47
2010-04-16
Confidential / Released
6.5
Compliance with FCC Rules and Regulations
As an integrated product, the MC55i Terminal is fully compliant with the grant of the FCC Equip-
ment Authorization issued for the built-in MC55i module, and therefore, bears the label “Con-
tains FCC ID QIPMC55I”.
The Equipment Authorization Certification for the MC55i module is listed under the following
identifiers:
FCC Idenitifier: QIPMC55I
Industry Canada Certification Number: 7830A-MC55I
Granted to Cinterion Wireless Modules GmbH
Radiofrequency radiation exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled envi-
ronment. This equipment should be installed and operated with minimum distance of 20 cm be-
tween the radiator and your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Note:
This terminal equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio communications. Howev-
er, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be de-
termined by turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment not expressly approved by Cinterion may
void the FCC authorization to operate this equipment.
This device contains GSM and GPRS Class10 functions in the 900 and 1800MHz Band which
are not operational in U.S. Territories. This device is to be used only for mobile and fixed ap-
plications.
Users and installers must be provided with antenna installation instructions and transmitter op-
erating conditions for satisfying RF exposure compliance.
