2. Operation description
3. Beverage extraction
>> Preparation before the usage
2
Plug in the power of the
machine
Press the power button. It shall
flicker during warm up and
keeps lit up in red after the
completion of warm up.
Start to dispense.
Take out the capsule
cup.
Lower grid for big
cup.
Upper tray for
small cup.
Adjust the cup holder
level by different cup
Press the key of the
corresponding beverage
After the water pump stops for
2 seconds, the buzzer makes a
long “beep” and the beverage
extraction is completed.
Place a capsule at its
proper position and then
push the capsule cup to
its proper position
Place the water cup
Method 1
Fill in water into the
water tank and place it
at a proper position
1
2
3
4
5
6
3
Take out the capsule cup, get rid
of the used capsule and push the
capsule cup back to its proper
position again.
Please empty the waste water
according to the actual usage
situation.
4. Cup volume/Temperature setting
Take out a capsule cup and place a
capsule to its proper position. Then
push the capsule cup to its proper
position
Rotate the cup volume scale clockwise
(Increase gradually and the scale lights
are lit up in order); rotate the cup
volume scale anti-clockwise (Decrease
gradually and the dial lights are lit up in
order)
>> Beverage key description
Press and hold Key 3 for 3
seconds. The order of extraction of
Key 3 under the extraction state is
switched, so does the flash of the
lights. Both are saved automatically.
Press Key 3 Firstly brews the
beverage of Key 1. The key
flashes at one time per second.
Then brew the beverage of Key 2.
The key flashes at one time per
second while other lights are lit up.
Press Key 1 The indicator
light flashes at one time
per second while the light
of Key 2 is unlit and other
lights keep lit up.
Press Key 2 The indicator
light flashes at one time
per second while the light
of Key 1 is unlit and other
lights are lit up.
8
7
Method 2
Connect the water piper/bucket to
add water (Please select this
option according to your actual
version)
The optional water supply
has a pressure range of 0 bar.