7
CHOOSE THE INPUT SOURCE TO WATCH
Press the ‘POWER’ button on the remote or the TV side panel.
Press ‘TV/AV’ button on the remote or ‘INPUT’ on the TV side panel.
Select the input source you wish to view that was connected from step 2.
Press ‘TV/AV’ again to exit the onscreen display.
For help, please refer to the Troubleshooting section in this manual or visit
www.cinios.com ‘CUSTOMER SUPPORT’ page.
Additional Setup:
The first time the TV is powered on, the Setup Wizard will display, or can be
reached by pressing the MENU button on the remote.
Choose your settings for Language, Time Zone, TV signal from over-the-air or cable.
Selecting auto-scan will start the TV automatically scanning for available channels
to lock in.