cineVision DVR2000, User Manual

Page: 4 / 48

4
DVD+VCR User’s Guide
Important Safety Instructions
1 Read Instructions – All the safety and oper-
ating instructions should be read before the
product is operated.
2 Retain Instructions
– The safety and operat-
ing instructions should be retained for future
reference.
3 Heed Warnings – All warnings on the prod-
uct and in the operating instructions should
be adhered to.
4 Follow Instructions
– All operating and use
instructions should be followed.
5 Cleaning – Unplug this product from the
wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
6 Attachments – Do not use attachments not
recommended by the product manufacturer
as they may cause hazards.
7 Water and Moisture
– Do not use this prod-
uct near water – for example, near a bathtub,
wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and
the like.
8 Accessories
– Do not place this product on
an unstable cart, stand, tripod, bracket, or
table. The product may fall, causing serious
injury to a child or adult, and serious damage
to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer’s instructions, and should use
a mounting accessory recommended by the
manufacturer.
9
A product and
cart combination
should be moved
with care. Quick
stops, exces-
sive force, and
uneven surfaces
may cause the
product and cart
combination to
overturn.
10 Ventilation – Slots and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the product and
to protect it from overheating, and these
openings must not be blocked or covered.
The openings should never be blocked by
placing the product on a bed, sofa, rug, or
other similar surface. This product should not
be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions
have been adhered to.
11 Power Sources – This product should be
operated only from the type of power source
indicated on the marking label. If you are
not sure of the type of power supply to your
home, consult your product dealer or local
power company. For products intended to
operate from battery power, or other sources,
refer to the operating instructions.
12 Grounding or Polarization – This product
may be equipped with a polarized alternat-
ing–current line plug (a plug having one
blade wider than the other). This plug will fit
into the power outlet only one way. This is a
safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of
the polarized plug.
13 Power-Cord Protection – Power–supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them, paying particu-
lar attention to cords at plugs, convenience
receptacles, and the point where they exit
from the product.
14 Protective Attachment Plug
– The product
is equipped with an attachment plug having
overload protection. This is a safety feature.
See Instruction Manual for replacement or
resetting of protective device. If replacement
of the plug is required, be sure the service
technician has used a replacement plug
specified by the manufacturer that has the
same overload protection as the original
plug.
15 Outdoor Antenna Grounding
– If an outside
antenna or cable system is connected to the
product, be sure the antenna or cable system
is grounded so as to provide some protection
against voltage surges and built-up static
charges. Article 810 of the National Electri-
cal Code, ANSI/NFPA 70, provides informa-
���������������������
��������������������������