7.0 MENU AND PICTURE SETTING
R599740 - BlackWing Two User Manual
31
The COMP function is used to configure the input signal of the Component Input terminal.
•
Y Pb/Cb Pr/Cr to be selected when a component video signal is input.
•
RGB to be selected when a RGB video signal is input.
•
SCART to be selected when a RGB video signal with Sync signal is input. Typically from a video source
equipped with a SCART output. (European market)
HDMI Color Space
The HDMI function is used to define the active color space of the HDMI input.
•
Auto, Configure the color space automatically
•
YCbCr(4:4:4) for a video source with YCbCr 4:4:4 color encoding.
•
YCbCr(4:2:2) for a video source with YCbCr 4:2:2 color encoding.
•
RGB for a video source with RGB color encoding.
Aspect
The Aspect function can stretch the picture on the screen.
•
4:3 sets the screen size of the picture into a 4:3 image.
•
16:9 set the screen size of the picture to 16:9
•
Zoom enlarge the picture vertically to fill the screen
Film Mode
The Film Mode function can detect the video cadence of film based video. This function can be switch off.
•
Auto, for normal circumstances
•
Off, switch the Film Mode Off when you are not watching movies shot on film
Color System
The Color System function is available for S-Video and Video inputs. This function is used to configure the color
system to be used. Adjust the Color System value to Auto / NTSC / NTSC4,43 / PAL / PAL-M / PAL-N / SECAM.
Black Level
The Black Level function enhances the black level of NTSC sources on S-Video and Video inputs. Adjust its value to
0% or 7,5%.
7.7
Install Menu
Menu Position
Sets the On Screen Menu position.
Menu Display
Sets the duration for displaying the Menu.
•
15 sec.
•
On
Line Display
Sets whether to display the input when switching input.
•
5 sec. Displays the selected input during 5 seconds after switching.
•
Off, the active input is not displayed.
Flip H.
Set Flip H. On if the unit is used for rear projection.
Flip V.
Set Flip V. On if the unit is installed in ceiling position.
High Altitude
Set High Altitude On when using the unit at low atmospheric pressure, typically higher than 900 meters above sea
