1.0 INTRODUCTION
6
R599760 - BlackWing Three User Manual
1.3
Quick Start
Plug your video source into the BlackWing Three
Connect your video source to the BlackWing Three using one of the available inputs:
•
HDMI 1 (version 1.3 with HDCP, supports digital SD, HD and PC formats)
•
HDMI 2 (version 1.3 with HDCP, supports digital SD, HD and PC formats)
•
VIDEO (supports analog SD signals)
•
S-VIDEO (supports analog SD signals)
•
COMPONENT (supports YPbPr, RGB and RGsB encoding, digital SD, HD up to 1080i and PC formats)
Plug the projector to the main power
•Before plugging in the Power Cord, ensure that all devices have been connected.
•Connect the power cord to the power input terminal of the projector.
Switch ON the projector
•
With the Remote Control Unit (RCU) by pressing the [ON] button.
•
Press the [Standby/ON] button at the Back Panel of the BlackWing Three.
Switch ON the projector.
Select the source
•
With the RCU by pressing the desired input button.
•
Press sequentially the Input button at the back of the BlackWing Three until you obtain the correct input.
Input sequence: HDMI 1 -> HDMI 2 -> VIDEO -> S-VIDEO -> COMP
Select the video source with the RCU or using the Back Panel of the projector.
Switch OFF
•
With the RCU by pressing the [OFF] button.
•
Press the [Standby/ON] button at the back of the BlackWing Three, and confirm the projector extinction by
SD signals: NTSC, PAL, PAL-N, PAL-M, SECAM for analog and 480i/p, 576i/p for digital.
HD signals: 720p50/60 Hz, 1080i50/60 Hz, 1080p24/50/60 Hz
PC formats: VGA, SVGA, XGA and SXGA @ 60Hz, see page 11 for more details.
OFF ........
OPERATE
......... ON
WARNING
LAMP
STANDBY/ON
HIDE
INPUT
MENU
EXIT
ENTER
Power ON button
N
D
C
CINEMA
NATURAL
DYNAMIC
HDMI 1
HDMI 2
S-VIDEO
COMP
VIDEO
ASPECT
WARNING
LAMP
STANDBY/ON
HIDE
INPUT
MENU
EXIT
ENTER
Select Active Input
