Start: press "Dry Cool " button to start with a "Hi " mode for operation and indication light gets
on. You can choose "Hi " or "Lo " air volume by continuously press "SPEED " button.
Timer: the default time is 4 hours. By pressing "TIME-UP-DOWN" button to select time duration. The
time can be set form 1 hour to 24 hours. The remaining time will be showed on the LED display. The
time selection will be recorded in memory when it is off, and will resume in your next usage.
Under the mode, the inter-change of air volume between "Hi " and "Lo " will not affect the time
counting.
Stop: press the "ON/OFF " button or pre-set time runs over, "Dry Cool " indication light gets off,
and the time display will disappear, and the machine stops automatically.
Start: press "Delay Vent " button, and the "Delay Vent " indication light gets on, it runs delay
vent mode. It will stop after 15 minutes as default setting. Time could not be selected, and no display.
Stop: press "ON/OFF " button, and the default time run over, the machine will stop automatically.
Start: press the "Vent " button , the “Vent " indication light gets on, air volume will run the
"Lo " mode. Press the "Speed" button to inter-change the "Hi " or "Lo " mode.
Timer: the default setting is 2 hours, By pressing the button "Time-up-down" to select time duration.
The time could be set from 1 hour to 24 hours. The time counter will be showed on the "88" LED
display. The time selection will be recorded in memory when it is off, and will resume in next usage.
Under the mode, the inter-change of air volume between "Hi " and “Lo " will not affect the
time counting.
Stop: press the "ON/OFF " button or pre-set time runs over, "Vent " indication light gets off,
and the time display will disappear, and the machine stops automatically.
Start: press "AUTO " button, the “AUTO " indication light gets on, and the machine starts
to run in automatic mode, and the air volume runs at the mode of "Lo ". After 20 seconds, the
machine will run at different modes according to the room temperature(air volume automatically
at "Hi " mode).
a. Room temperature>24 ℃ degrees, the "CIR " mode.
b. Room temperature<20 ℃ degrees, the "Heat " mode.
c. 20 ℃ degrees<room temperature<24 ℃ degrees, the "Dry Hot " mode.
d. Timer: default setting is 1 hour, it is not changeable.
Stop: press the "ON/OFF " button or pre-set time runs over, "AUTO " indication light gets
off, and the time display will disappear, and the machine stops automatically.
2. Ventilation Function ：
Instructions
09
Function Descriptions
10
FUNCTION
AUTO
Automatic detection
operation mode
Delay power off
15 minutes
Air exhaust
ION
ION generation
VENT
(Wind speed switch
key high/low)
Air exhaust
COOL
(Wind speed switch
key high/low)
The bathroom in the
cool wind (Summer)
Clothes dry,
bathroom dry
HEAT
(Wind speed switch
key high/low)
Warm air
DRY
(Wind speed switch
key high/low)
Rapid drying of the
bathroom, laundry
drying
CIR
(High/low
fan speed key switch)
Bathroom cycle
OSC
(up and down
automatic)
Swing direction
of the wind swing
APPLICATION
Pre-set
/
Default
setting
OPERATION STATUS
Circulation Air outlet
PTC heater
/
Low
speed
ON/OFF
High/Low
speed
High/Low
speed
High/Low
speed
High/Low
speed
High/Low
speed
30~60
Degree
oscillation
/
ON
/
ON
Half Open
(About 15
degrees)
OFF
Half Open
(About 15
degrees)
OFF
/
/
OFF
/
OFF
OFF
ON
ON
OFF
/
1h
15 Min
/
2h (1-24h)
4h (1-24h)
2h (1-24h)
4h (1-24h)
2h (1-24h)
Default
90 degree
1. AUTO Function ：
4.Cool Function ：
3. Delay Vent Function ：
