Before LM400 Using
Thank you for purchasing the Cineroid LED light.
The Cineroid LED employs a very high color rendering index (CRI). It dislays a very stable color
temperature and brightness so that both motion pictures and still images can be taken in their most
natural color tones. Please read this user manual thoroughly before using the Cineroid LED.
Test Before Operating
It is recommended to test the Cineroid LED before use. Make sure the light comes on when powered
and that the brightness control works properly.
Safety Precautions
Please observe the following safety precautions as they are meant for the safe and proper use of the
product to reduce the risk of accidents. Upon reading the user manual, keep it in a safe and available
place.
2
Do not use any batteries, power cord, or accessories that are not specified in this document.
When using a power cord, be sure to plug it in completely. Do not handle power plugs when your hands are
wet. When unplugging the power cord, grasp the plug body or adapter instead of the cord.
Power cords that are scratched, heavily bent or twisted can potentially be hazardous and a source of electric
shock and/or fire.
Do not insert foreign objects into the product's electric or cable components.
Do not place the power cord near sources of heat as this may melt or cause damage to the cord potentially
causing fire or electric shock.
Do not disassemble or modify the product. This may damage the product and cause danger due to a malfunction.
Please keep the product out of reach of young children. Injuries may occur due to damage to the product.
When using the product in an airplane or hospital setting, it is recommended to acquire authorization first
as signals or electro-magnetic waves from the product may cause other equipment to malfunction.
Do not store the product in a dusty or humid environment as damage may occur.
When the product is mounted on a camera, do not lift or move the camera by grabbing the product. This may
cause damage to the product or the camera mount.
Do not clean the product with paint thinner, benzene, or other volatile solvents. This may cause damage to the
roduct and become a fire hazard.
This product is not waterproof. If the product is dropped in water, contact the service center immediately.