CineRAID Home CR-H458, Quick Start Manual

Page: 4 / 12

4
To install the Hard disks
Please remove the plug from the power supply outlet before
assembling the hard disk, it will cause an electric shock and/or
damage if not disconnected.
1. Press 2 blue door latches inward to release the
tray lock, and then pull out the tray.
2. Put the HDD on the tray and make sure the HDD
screw holes on the bottom are aligned to the 4
posts on the tray.
3. Lock the HDD in the tray by pressing the side
plate onto each side of the tray, and connect with
the HDD.
4. Slide the installed trays back to the enclosure,
a click sound will be heard to confirm the tray is
locked in the enclosure. Then connect the eSATA
or USB 3.0 cable and turn ON the device