Turn On/Off Esprocker Controller
Automatic Lens Calibration
Hold the (REC) and (A) button for three seconds.
Manuel Lens Calibration
Hold the (REC) and (B) button for three seconds. Press the (A) button to rotate the
lens clockwise, then press the (A) button again to stop the rotation and press the
(REC) button to set the start point. Press the (B) button to rotate counter clockwise
and press the (B) button again to stop the rotation, then press the (REC) button
to choose the end point.
Setting up Two Preset points
Push the rocker swtich button on your esprocker controller to a lens focus distance
point, then press and hold the (A) button for three seconds to record that point.
Then move on to the next lens focus distance point, press and hold the (B) button
for three seconds to record your second lens focus distance point.
Setting up Preset
Hold the (A) and (B) button for three seconds to get the accessibility to the esprocker
function manual. F01 is the motor rotating speed option. F03 is the manual lens
calibration option. F05 is the recalibrating focus controller option. F06 is the
direction display option.
7 Recalibrating Focus Controller
After you get to your esprocker function manual, go to the F05 function. Push the
rocker swtich button to the left end point then press the (REC) button. Push the
rocker swtich button again to the right end point then press the (REC) button
again. This sets up your full camera lens traveling distance with your esprocker’s
rocker swtich button distance from left to right that you have set.
Esprocker
Hold the (REC) button for three seconds to turn the esprocker controller on/off.
Synchronize Esprocker Controller and Motor
Hold the button on the motor for three seconds then hold all three buttons on the
esprocker controller for three seconds.
© 2015 CINEGEARS All Rights Reserved
