3
GREASE DRIP CAN
Use any standard Pepsi or Beer can with a RING-PULL top. Firmly slide the clip at either
end of the grill inside the RING-PULL opening, so that the opening is below the grease drain.
Secure can as necessary.
LP CYLINDERS
This grill is suitable for use with a minimum of two 20lb or 30 lb LP cylinders only with
approximate dimensions of 12 inch diameter and 21 or 24 inch high. The LP-gas supply
cylinders must be constructed and marked in accordance with the specifications for LP-gas
cylinders of the U.S. Department of Transportation (DOT) or the National Standard of
Canada, CAN/CSA-B339, Cylinder, Spheres and Tubes for the transportation of dangerous
goods.
Carefully read and follow the instruction and warning marking
on the LP Cylinders.
•
Fill the LP cylinders with propane gas at reputable propane dealer. Never fill the cylinder
beyond 80 percent full. If this instruction is not followed exactly, a fire causing death or
serious injury may occur.
•
The LP cylinders must be fastened to the grill in an upright position of proper vapour
withdrawal. An easy to tighten and release nylon strap is located as in figure 1 on both
leg assemblies.
•
You MUST use this strap to secure the LP cylinders to the OUTSIDE of the grill legs.
•
You must NEVER locate the LP cylinders directly beneath the firebox.
•
DO NOT store a spare LP-gas cylinder under or near this appliance. If this instruction is
not followed exactly, a fire causing death or serious injury may occur.
•
You must NEVER allow the hose to touch any part of the grill which may become hot.
•
Regulators and hose must be used. Attach the regulator fittings to the LP cylinder valves.
Firmly tighten the fittings by hand only, turning clockwise B . The hoses to the regulators
must be located horizontal to the regulators to keep any water or liquid from dripping onto
the regulators.
The 11 inch W.C. (2.8 kpa) pressure regulators supplied with the appliance must be used.
•
Gas must be turned off and cylinders disconnected at the propane cylinders when the
appliance is not in use.
•
When the grill is to be stored indoors, disconnect the LP cylinders from the grill and store
them outdoors in a well ventilated area out of the reach of children.
•
When the LP cylinders are connected to the grill, the grill and LP cylinders must be stored
outdoors in a well ventilated area.
•
The LP cylinders must include a collar to protect the cylinder valves.
