Cincoze DS-1300 Series User Manual Download

Page: 8 / 152

DS-1300 Series | User Manual

Technical Support and Assistance

1. Visit the Cincoze website at

www.cincoze.com

where you can find the latest information about

the product.

2. Contact your distributor or our technical support team or sales representative for technical

support if you need additional assistance. Please have following information ready before you

call:

⚫

Product name and serial number

⚫

Description of your peripheral attachments

⚫

Description of your software (operating system, version, application software, etc.)

⚫

A complete description of the problem

⚫

The exact wording of any error messages

Conventions Used in this Manual

This indication alerts operators to an operation that, if not strictly observed, may

result in severe injury.

NING

This indication alerts operators to an operation that, if not strictly observed, may

result in safety hazards to personnel or damage to equipment.

This indication provides additional information to complete a task easily.

NOTE

Summary of Contents for DS-1300 Series

























































































































































Search results

Summary of Contents for DS-1300 Series

Reviews:

Related manuals for DS-1300 Series

Brands by name

Popular brands

Cincoze DS-1300 Series, User Manual

Search results

Summary of Contents for DS-1300 Series

Reviews:

Related manuals for DS-1300 Series

Brands by name

Popular brands