Cincoze DS-1000 Series User Manual Download

Page: 103 / 126

DS-1000(L/P) / DS-1001(L/P) / DS-1002(L/P) Series

Superior Performance Fanless Computer

| User’s Manual

CN-TB-QP22-44_V1.0

103

Chapter 4: BIOS Setup

4.3.6 USB Configuration

■

Legacy USB support

Enabled

: To enable legacy USB support.

Disabled

: To keep USB devices available only for EFI specification,

Auto

: To disable legacy support if no USB devices are connected. Enables

support for legacy USB. Auto option disables legacy support if no USB devices
are connected.

■

USB3.0 support

This item allows users to enable or disable USB3.0 (XHCI) function.

■

XHCI Hand-off

This is a workaround for OS without XHCI hand-off support. The XHCI ownership
change should claim by XHCI driver.

■

EHCI Hand-off

This is a workaround for OS without EHCI hand-off support. The EHCI ownership
change should claim by EHCI driver.

■

USB Mass Storage Driver Support

This item allows users to enable or disable USB Mass Storage Driver.

Summary of Contents for DS-1000 Series































































































































Search results

Summary of Contents for DS-1000 Series

Reviews:

Related manuals for DS-1000 Series

Brands by name

Popular brands

Cincoze DS-1000 Series, User Manual

Search results

Summary of Contents for DS-1000 Series

Reviews:

Related manuals for DS-1000 Series

Brands by name

Popular brands