CIMLINE Magma 150, Owner'S/Operator'S Manual

Page: 13 / 48

13
1. Place material pump in neutral (a)
2. Remove sealing tip and return wand to access port (b).
3. Pin wand trigger and set handle forward (c).
4. Close tank maintenance valve (d).
5. Connect air hose and open air cleanout valve (e).
6. Allow air to blow freely through sealing hose.
7. Move wand handle back and let air blow into tank (c).
8. Open Tank outlet valve momentarily, then close (d).
9. Shut air hose off at compressor, close air cleanout valve and dis-
connect hose (e).
10. Turn Key off and proceed with normal machine shut-down.
(a)
(b)
(c)
(d)
(e)
Cleanout Procedure (Optional Air Cleanout)