![Cimbali Ambassador SE E91 Manual Download Page 10](http://html1.mh-extra.com/html/cimbali/ambassador-se-e91/ambassador-se-e91_manual_2607153010.webp)
USE
7. Switching on – electric
“Before switching on the machine, ensure the
following:
The mains switch is on.
The water mains tap is open”.
Turn the master switch (
1
) to position 1. The indicator light
“machine on” (
2
) switches on.
If the water level in the boiler is less than the minimum required,
WKHERLOHULV¿OOHGXSWRWKHFRUUHFWOHYHO
Turn the master switch (
1
) to position 2.
The heating element inserted indicator light (
3
) lights up.
The boiler is heating. Wait until the pressure reading on the
boiler pressure gauge (
78
) corresponds to the required working
pressure value (1,2 bar).
The machine is now ready to be used.
8. Switching on – gas (only for G machines)
“Do not switch on the gas when the boiler is
under pressure”.
Before switching on the machine, check that:
- The Mains electric switch is on
.
- The water tap is open.
- The gas tap is open.
Press and rotate the knob of tap towards the left to position
B
,
and keep pressed for about 30 seconds. Check that window
(
23
) is open and after a few seconds release knob.
Wait until the initial heating phase has been completed, i.e.
when the
required operating pressure (approx. 1.2 bar) is indicated on
the manometer (
78
).
At the end of the working day, switch off the machine by rotating
the general switch (
1
) to the 0 position and turn of the gas tap
turning it to the “0” position.
9. Switching-on – dual (gas and electric)
The boiler may be heated by both gas and electricity simul-
taneously.
iIn this way the working pressure is reached more rapidly since
the water in the boiler is heated simultaneously by the electrical
KHDWLQJHOHPHQWVLQVLGHWKHERLOHUDQGE\WKHÀDPHIURPWKH
burner under the boiler.
To switch on, follow the procedures in Paragraph
1. SWITCHING
ON – ELECTRIC
and
2. SWITCHING ON – GAS.
10. Cup-warmer
(where contemplated)
Place only coffee cups, cups and glasses to be used in
conjunction with the coffee machine on the cup-warmer.
Ensure that the coffee cups are completely drained before
placing them on the cup-warmer.
No other objects shall be placed on the cup-warmer.
Press the button (
6
) and check to see that the green light (
5
)
turns on.
CAUTION: do not put any cloth on the cup-
warmer.
1
2
3
78
30
English
Summary of Contents for Ambassador SE E91
Page 3: ...3 26 27 28 29 30 11 9 25 13 17 10 20 8 21 23 6 5 1 2 3 78 16 18 ...
Page 22: ...42 English ...
Page 36: ...128 ...