29
BLITZ
5-1996
8
FILLING PROCEDURES
8
FILLING OPERATION SHOULD BE CARRIED OUT WHEN THE MACHINE IS ON A FLAT SURFACE. ON THE
TREATMENT PLACE, BEFORE THIS OPERATION, PREPARE THE QUANTITIES OR THE MIXTURES TO BE
POURED INTO THE TANK.
THE PUMP MUST NEVER WORK WITHOUT AND FLUID.
IT IS ALWAYS NECESSARY TO USE PERSONAL PROTECTIVE MEANS.
8.1 - INTRODUCTION - USE OF THE FAN RELEASE
The tank filling and the mixture agitation outside the cultivations cannot be done without the help
of the fan release.
The release, with front restrain, fitted to the fan shaft, is situated in the machine front part, under the protection guard
and can be reached through the appropriate movable cover.
• Releasing the fan for filling operation
EXECUTION:
1. Bring the atomizer on the filling site.
2.
Stop the tractor, take the key out of the control panel and check that the fan has stopped.
Remove the P5-P6-P7 adjustment group by taking away the supporting bracket.
Press the spring push-button till the end and pull the front body until it is again released outwards. The released body
should turn free: then the pump runs and the fan is excluded.
Re-fit the protection cover by fixing it with the 2 appropriate screws.
Start the tractor and carry out the filling operation (see filling instructions).
UMAT041
UMAT033
FRONT
BODY
PROTECTION
COVER
SPRING PUSH-
BUTTON
