DOC. N. CIMATICII
REV. 7
ED. 08.2021
Chapter 5. OPERATING INSTRUCTIONS
5.6 Master Roll
To install a new roll please follow these instructions:
1)
Lift unwind roll, with black plastic roll caps, from the chucks
2)
Unscrew the collar from
one
side
3)
Remove the black plastic roll caps and insert them in the new roll. Checking to make sure that
the film is unwinding in the correct direction. The inside of the roll is normally the sealing side.
4)
Lower the unwind roll back into the chuck
If you have done the above correctly the film should line up correctly with the trays. If not, loosen the
collars and recenter the film.
5.7 Film loading
The film should be threaded as shown in
Figure 4
below:
Figure 4.
Minimum tension Normal tension Maximum tension
