15
EN
Cleaning and Storage
CAUTION!
■
Disconnect the device from the mains power before cleaning it.
■
The device, the mains cable and the mains plug must not become wet.
■
Do not use any corrosive or abrasive cleaning agents to clean the device. These can
damage the surface.
• Take off the attachments (
5
,
6
) and clean the device and the attachments (
5
,
6
) with
a slightly damp cloth and a little mild detergent if necessary.
• Do not wrap the mains cable around the device.
• Store the device and the accessories in a dry place which is protected from sunlight
and is not accessible to children or animals.
Troubleshooting
If the device does not work properly,
fi
rst check whether you are able to rectify the prob-
lem yourself.
Do not attempt to repair a defective
electrical device yourself!
Problem
Possible cause
Solution
The device
does not work.
The device is not receiving
any power supply.
Check whether
• the mains plug is inserted in
the plug socket correctly.
• the plug socket is defective.
• the fuse of the mains con-
nection is inserted.
The device is not switched
on.
Move the On / Off switch (
8
) to
the
M
or
M + I
position.
The infrared light
does not turn on.
The device is not switched
on or the infrared function is
not activated.
Move the On / Off switch (
8
) to
the
M + I
position.
