Transmig 210, 250, 310, 330
DOC No: MIGTRN0001 Page 9 of 31
Issue No: 2 Date: 14/09/98
Ù
To achieve this rating, the 15 Amp plug and primary supply lead (as supplied) must be replaced
with a 25 Amp plug & lead. This must be carried out by a qualified electrical tradesperson.
2.2 Transmig 310 and Transmig 330 Specifications
Transmig 310 Transmig 330
Plant Assembly part number
704836 704839
Plant Mass 87Kg 117Kg
Plant Dimensions 860mm x 490mm x 845mm 860mm x 490mm x 845mm
Power Source part number
704838 705085
Power Source Mass 71Kg 70Kg
Power Source Dimensions 640 x 310 x 732 640 x 310 x 732
Number of Phases Three Phase Three Phase
Frequency 50 / 60 Hz 50 / 60 Hz
Open Circuit Voltage Range 17.5 to 41.2V 17.5 to 41.2V
Output Current Range 25 to 310A 25 to 330A
Rated Output Duty Cycle
310A @ 30%
220A @ 60%
170A @ 100%
330A @ 30%
228A @ 60%
177A @ 100%
Duty Cycle Period 5 minutes or 10 minutes 5 minutes or 10 minutes
Number of Output Voltage Values 24 24
Wire Size Range 0.6 - 1.2 Hard / 0.9 - 1.2 Soft 0.6 - 1.2 Hard / 0.9 - 1.2 Soft
Operating Temperature Range 0°C to 40°C 0°C to 40°C
Primary input voltage 220V 380V 415V 220V 380V 415V
Ñ
Rated Input Current for output current
at 100% duty cycle.
21A 12A 11A 21A 12A 11A
Rated kVA for output current at
100% duty cycle.
8kVA 8kVA 8kVA 8kVA 8kVA 8kVA
Maximum Input Current 36A 21A 19A 38A 22A 20A
Generator Requirements 13.7kVA 13.7kVA 13.7kVA 14.4kVA 14.4kVA 14.4kVA
Rated Outlet @ Max Duty Cycle 25A 15A 15A 25A 15A 15A
ª
Fuse Size @ Max Duty Cycle 50A 30A 20A 50A 30A 20A
Ñ
The Rated Input Current should be used for the determination of cable size & supply
requirements.
ª
Motor start fuses or motor start thermal circuit breakers are recommended for this application.
Australian Standard AS3000 (Clause 2.4.3.4) permits the use of a fuse or circuit breaker rated at
two times the rated input current.
2.3 MIG Torch Specifications
Torch Part Number 717578
Torch Type TWECO 250A (Eliminator Consumables)
Torch Cable Length 3.6 metre
