On a mobile device, use the following steps to set the Smart
Humidor up:
1)
Remove the connector from your Cigar Oasis unit and
replace it with the Smart Humidor Wi-Fi Connector.
2)
When the Wi-Fi Connector is plugged in and your Next
Generation Cigar Oasis is powered on the Wi-Fi
Connector LED will start a blink pattern of red for 5
seconds off for 5 seconds.
3)
Hold down the
SUN
&
DOWN
buttons simultaneously
until the menu changes to
Snd
4)
Press the
UP
arrow to see
CFG
(configure)
5)
Press the
SUN
button once to send a configuration
signal. The LED will blink green a several times, stay
solid green for about 10 seconds, then change to
amber. (Note: Amber is when both the red and green
LEDs are on together, look carefully to see this)
6)
On the mobile device go to Settings then Wi-Fi and
choose the network that matches the
MAC ID #
on
the back of Wi-Fi and choose that network.
7)
Open
Internet
browser
and
type
in
192.168.1.1/gsclient.html
8)
Click
Wireless Network Configuration
9)
Click Select an
Existing network
10)
Choose the correct network from the list and
SELECT
11)
Enter the network password and click
NEXT
12)
Click
Save & Apply
If the LED is blinking red 1-4 times, then off regularly you are
connected to the network. This completes the first part of the
Configuration.
If the LED is continuously red for 5 seconds then off for 5
seconds you did not successfully connect to your network.
Return to step 2 and try again. Be sure your network password
is correct.
Use the following steps to complete the setup.
1)
Use the Cigar Oasis App or on your computer go to
wifi.cigaroasis.com
to create an account. Follow the
steps there to validate your email address to login.
2)
Click
Add New
3)
Enter the
MAC ID
#(located on the back of the Wi-Fi)
4)
Enter a nickname and location of the humidor
5)
Click
ADD
6)
Press the
SUN
&
DOWN
arrow until
Snd
appears
7)
Click the
SUN
button once to send out a signal for first
reading, be patient & don’t press again. It may take
up to 5 minutes to register.
8)
When the reading is registered you will receive a
Success notification and are now ready to use your
Smart Humidor
9)
Press the
SUN
&
DOWN
arrow to return to current
humidity screen
IMPORTANT:
The Wi-Fi Connector updates one time per hour.
If you change the humidity setting from the computer or the
App it will update your Cigar Oasis at the regularly scheduled
time.
To set up email and text alerts, go to the Cigar Oasis App or
wifi.cigaroasis.com then click on
Profile.
Under the email
address and phone number check the
NOTIFY ALL
box. If
there is a green “thumbs up” icon next to the email address or
phone number that means they have been validated. If you
see a red “thumbs down” icon, click the “Send Validation
Code” button. You will need to use the text or email link to
enter the validation code.
You may move the Wi-Fi connector to work with a different
Cigar Oasis and as long as it is on the same network you may
just plug it in. When moving your Cigar Oasis Wi-Fi to a
different wireless network or changing the network password,
follow the first part of the instructions so that the Wi-Fi can be
configured to the
new
router or password.
If the LED is Red and always on, it is not connected to your
network. To proceed, completely unplug the unit then power
it back on and follow the setup procedure again.