ONT G-25E Hardware Installation Manual
Figure 3 Plug in the fiber connector
4.
Attach the Laser Lock Door to the ONT (Figure 4).
Figure 4 Attach the Laser Lock Door
5.
Finally it looks like figure below (Figure 5).
Figure 5 Connect to network: final view
3.3
Connecting Power
1.
Plug the circle two pin 12V DC power connector of power converter to ONT power port
2.
Plug the input of power converter into a live AC outlet
3.
Verify that the power (POWER) LED on the ONT is lit green indicating that local power is on
and voltage is good.
313-12201-02 Rev. B: August 2007
Cambridge Industries Group Co. Ltd
7
