Quick-start User Guide:
1. Switch on the AVID3 Amplifier via the Power Switch ( ) of either the main unit or the IR remote
control.To turn the main unit ON - Short press Switch input, OFF - Press Hold ON/OFF Button.
2. Ensure the volume level of the AVID3 is set to 0 using the volume controls on the main unit or
IR remote control .
3. Connect your media player/sound source (eg. CD, DVD, MP3, laptop, etc) from its line level output or
headphone output into the AVID3’s 2 x Stereo Phono input, the 3.5mm Jack input or hard wired
input on the rear panel if your installer has provided this option.
(Connecting cables are commonly available or may have been supplied as part of your system by
the installer).
4. Set the volume level on your media player to approximately half way and press PLAY. (NB. Not all
media players will feature their own volume control).
5. Using the volume level controls (of either the AVID3 main unit or IR remote control), increase the
volume level of the AVID3 amplifier to a clear and comfortable level for your audience.
(Maximum Volume Level = 20).
6. NOTE: If the volume level is still too low, further increase the volume level of the media player; or
where the audio signal is from a headphone output (which normally gives a lower signal level),
switch the Input Level Switch on the main AVID3 unit to ‘Lo’.
Audio Level
Display
Volume
Level Up
Volume
Level Down
ON/OFF
Switch/Input
Select
IR Receiver
Window
Hi/Lo Line
Level
Sensitivity
Switch
3.5mm
Jack Input
Fascia
Trim
Plate
