CIAT COMFORT LINE, Instruction Manual

Page: 23 / 32

For size 6:
■ Maximum flow of 16 l/h for a head height of 2 metres and a maximum pipe length of 5 metres.
■ Maximum flow of 15 l/h for a head height of 2 metres and a maximum pipe length of 10 metres.
The operation points are provided in the table below. Connect a clear drain pipe (not supplied) with an internal
diameter of 6 mm between the pump outlet and the wastewater pipe. This pipe should not be pinched or touch the
unit or any other external component.
Table of actual flow rates for the pump connected to a PVC pipe with an internal diameter of 6 mm.
Pump performance: Water flow rate in litres per hour
Hauteur de refoulement
Total length of the discharge pipe
5 metres 10 metres 20 metres 30 metres
0 metre 20 19 18 17
2 metres 16 15 14 13,5
4 metres 11,5 11 10,5 10
6 metres - 8,5 7,5 6,5
8 metres - 6 5 4
10 metres - 4 3,5 2,5
Under operating conditions outside of the temperature and relative humidity ranges recommended in the "Operating
limit recommendations" section, the discharge pipe must be insulated to prevent the formation of condensation,
which could damage the installation and the pump. We recommend using a flexible transparent PVC type pipe with
internal diameter 6 mm/external diameter 9 mm. It is essential to ensure that the pump connections are sealed. A
clamp can be used for this purpose.
Make sure that the flow of water to be discharged in the thermal selection is suitable for your
application.
Note: this accessory must always be used with a valve control device, to ensure valve control of the high
safety device when the valve is closed (closure of the condensate drains).
4 - NSTALLATION AND CONNECTIONS
EN-23 COMFORT LINE TM