5.2 - FLOWAY RHEZ 10000 & 15000 : PROCEDURE FOR ROOF ASSEMBLY
■
The Floway RHEZ 10000 & 15000 are delivered in two blocks: a Wheel Block & an FMA Block, with a roof attached to each block
■
Procedure for assembling the roof
1. Remove the roof from the Wheel block (retaining the screw and cap)
2. Assemble the blocks
3. Reposition the roof from the Wheel Block, taking care to ensure the roofs interleave correctly
4. Secure the roof to the block
Delivery of two separate blocks: WHEEL Block + FMA Block
Removal of the WHEEL Block roof
5 – INSTALLATION AND INSTALLATION CONNECTIONS
FLOWAY EN-18
