CIAS Elettronica S.r.l.
Ed. 1.5
Installation Handbook
page
43
of
66
CORAL-PLUS
3° Example
(changing slope)
Pole on a different level from the microwave working plane
The head is installed on a changing slope or a valley; the microwave lobe will then work on a
different working plane.
4° Example
(changing slope, suggested installation)
Pole on a different level from the working plane, for installation on not-aligned working
planes.
Tx1 is on a different working plane from Rx1 placed instead on the working plane of barrier 2.
5° Example
(changing slope,
suggested installation
)
Pole on a different level from the working plane, for installation on not-aligned working
planes.
Tx1 is on a different working plane from Rx1 placed instead on the working plane of barrier 2
.
6° Example
(changing slope, installation not suggested)
Pole on a different level from the working plane, for installation on not-aligned working planes
.
You can use a single pole, but resulting dead zones must be protected with two sensors.
Summary of Contents for CORAL-PLUS
Page 70: ...NOTE...
Page 71: ...NOTE...
