Chyron infinit! series, Operation Manual

Page: 671 / 978

iNFiNiT! Family Operation Manual
Revision D 16-19 Mix Effects
[ ] 2. Press
CLR
, enter the ID number of the message
into the buffer, then press READ .
[ ] 3. Press DO .
The message appears on screen as set in Read Effects.
[ ] 4. For each additional message you want to
display, repeat Steps 2 and 3.
([HFXWLQJ0L[(IIHFWV6HTXHQFH
A series of prerecorded Mix Effects messages can be
loaded and executed by using a Function Key(s). This
allows you to execute an entire sequence using one key-
stroke. See Section 12 for information on programming
Function Keys.
.H\(QDEOH
Keying is a “cut-and-fill” function that can be used in con-
junction with Roll, Crawl (§16.14) and other messages.
This function allows you to define a “cut-out”, or Key on
CHANNEL A/AIR and fill in the cut-out with video from
CHANNEL B/AIR (“Fill”).
Key Enable
is available to the Primary User in a three
buffer Dual User iNFiNiT! system; a two-buffer, single
user iNFiNiT! system; or a two-buffer MAX!> system.
NOTE
Mix Effects cannot be executed while
Key Enable is activated.
To activate
Key Enable
:
• Press CNTL K or select Key Enable .