6.2
Shift
Mode .....................................................................................................................14
6.2.1 APO --- Enable and Disable “Auto Power Off” Function ................................14
6.2.2
SETUP ..................................................................................................................14
6.2.3 A-H (Auto Hold)...................................................................................................15
6.2.4
LOG ......................................................................................................................15
6.2.5
SAVE.....................................................................................................................15
6.2.6
ALMLOG .............................................................................................................16
6.3 Set Up Mode ...................................................................................................................16
6.3.1
Log setup...............................................................................................................16
6.3.2 Hi limit ..................................................................................................................16
6.3.3 Lo limit..................................................................................................................16
6.3.4
Beeper
ON/OFF ...................................................................................................17
6.3.5
Backlit
(min 30 sec.) .............................................................................................17
6.3.6 APO (mini 1 minute)............................................................................................17
6.3.7 Time of the system................................................................................................17
6.3.8
Thermocouple offset adjust .................................................................................18
7. Operation with Data Logging.................................................................................................18
7.1 Moving among the function of Data read.....................................................................18
7.1.1 READ OUT THE DATA .....................................................................................18
7.2
Leaving
Data Read.........................................................................................................19
7.3 Clear Data in the Memory.............................................................................................19
8. Maintenance ............................................................................................................................20
17
6.3.4 Beeper ON/OFF
1. Press SETUP button to setup beeper on or off.
2. Press “
S
” or “
T
” to turn on or off the beeper function and press “SETUP” button to
confirm that the setting is completed and beeper will sound two times.
3. Press “
S
” or “
T
” to page up or page down the setup menu.
6.3.5 Backlight
（
min 30 Sec.
）
1. Press SETUP button to setup time of backlight on.
2. Press “
W
” or “
X
” to select field.
3. Press “
S
” or “
T
” to increase or decrease the setting value and press “SETUP” button to
confirm that the setting is completed and beeper will sound two times.
4. Press “
S
” or “
T
” to page up or page down the setup menu.
6.3.6 APO
（
min 1 minute
）
1. Press SETUP button to setup time of APO.
2. Press “
W
” or “
X
” to select field.
3. Press “
S
” or “
T
” to increase or decrease the setting value and press “SETUP” button to
confirm that the setting is completed and beeper will sound two times.
4. Press “
S
” or “
T
” to page up or page down the setup menu.
6.3.7 Time of the system
Press “SETUP” button to into setup time of system, after enter this function, the Time display
“Y : M : D” (Year : Month : Date) at the lower-right of Display changes to “H : M : S” (Hour :
Minute : Second) with number of year blinking.
Pressing “
X
” button to move the blinking to next number, from number of Year to Month to
Date, press “
X
” when number of date blinking the display changes to H : M : S with number
of Hour blinking. To move blinking to next number also by pressing “
X
” button. When
number is blinking, press “SETUP” button will quit the “TIME SET” function and the clock
starts from the set time. By Pressing “
S
” or “
T
” button to increase or decrease the blinking
number by 1 and circulate the numbers in following ranges.
Year:
00 to 99, Month: 01 to 12, Date: 01 to 31
Hour:
00 to 23, Minutes: 00 to 59, Second: 00 to 59
When time of the system setup is completed press “
S
” or “
T
” to page up or page down the
setup menu.
